乐播传媒视频

Skip to main content

Universal Air Connectors

罢丑别听听补苍诲听聽lines employ聽a universal air connector system. Connectors are most commonly located on the base of the profile, but, in the case of straight (as with Pneuma-Cel) or U-shaped configurations,聽can also be located out an end. Universal connectors cannot be located on the side of a profile.聽Depending on the width of the selected cross section, either a 10-32聽or 1/8-27 NPT universal male fitting will聽be used. The following options are currently available within the聽. These will be permanently affixed to the universal connector, so it’s ready for immediate use.

ACV1-1-100
ACV3-1-100

1/4″ OD blue polyurethane hose, 18″ long, no adapter. For use with EPDM, Nitrile, and Neoprene profiles

ACV1-1-101
ACV3-1-101

1/4″ OD blue polyurethane hose, 1/8-27 male NPT adapter (supplied loose). For use with EPDM, Nitrile, and Neoprene profiles

ACV1-2-100
ACV3-2-100

1/4″ OD clear high temp hose, 18″ long, no adapter. For use with Silicone profiles

ACV1-2-101
ACV3-2-101

1/4″ OD clear high temp hose, 18″ long, 1/8-27 male NPT adapter. For use with Silicone profiles

ACV1-2-102
ACV3-2-102

1/4″ OD clear high temp hose, 18″ long, M8X1.0 male adapter. For use with Silicone profiles

ACV1-3-102
ACV3-3-102

6mm OD green polyurethane air connector, M8X1.0 male adapter (supplied loose). For use with EPDM, Nitrile, and Neoprene profiles

ACV1-4-100
ACV3-4-100

1/4″ Direct Push Connect Adapter. For use with all materials

Need help solving a tough engineering problem?